PUBLICATIONS

Publications

Reviewed Journal Publications (* indicates corresponding authors)

2024

80. Printability of PLLA based hybrid scaffolds and evaluation of their physical, surface and degradation behavior (in preparation)

79. Three/Four Dimensional Printing of Smart Electroactive Materials for Nervous Systems Regeneration: A review (in preparation)

78. Ormia-Inspired Single-Microphone Approach for 3-Dimensional Sound Localization (in preparation)

77. Design and Characterizations of a Multi-Sound Receiver using Fly Ormia ochracea's Ears-Inspired MEMS Directional Microphone Array (in preparation)

76. Nickel cerium oxide-modified disposable and portable sensor for the rapid monitoring environmentally hazardous organophosphate pesticide in water and vegetable samples (under review, Q1)

75. Exploring Bacterial Detection and Transport Analysis through Redox Impact Electrochemistry: Dynamics at the Single-Particle Level (under review, Q1)

74. A Review on Sound Source Localization Techniques, Challenges, and Applications (under review, Q1)

73. Development of heterointerface engineering self-charging power system via integration of wearable flexible piezoelectric nanogenerator and asymmetric supercapacitor – Sustaining power provided by mechanical energy from environmental surroundings (under review, Q1)

72. Comprehensive review on dye-sensitized solar cells (DSSCs): What we know and why researchers shifted away from DSSCs? (in revision, Q1)

71. How grain boundary misorientation affects hydrogen flux in pure iron? A phase-field based fully kinetic model for the interaction of hydrogen diffusion and trapping (under review, Q1)

70. Zinc tungstate nanoparticles integrated on zinc oxide h-MDs-based a flexible piezoelectric power device for self-powered energy harvesting and a new energy technology for the real-time indoor laboratory safety warning system (in revision, Q1)

69. Mohd Fahad, Arbaz Waqar, Byungki Kim*, Effective-performance of inorganic and organic (barium zirconium titanate/polyvinylidene fluoride) piezoelectric composite for energy harvesting and self-powered smart IoT-based electronics, Journal of Alloys and Compounds, Volume 985, 2024, 174033, https://doi.org/10.1016/j.jallcom.2024.174033 (IF=6.2, SCIE, JCR 90.5%)

68. Ashish Kumar Shukla*, Satyapriya Bhandari*, Shirsendu Mitra, Byungki Kim, Krishna Kanti Dey*, Buoyancy-Driven Micro/-nanomotors: From Fundamental to Applications, Small, 2024, 2308580, https://doi.org/10.1002/smll.202308580 (IF=13.3, SCIE, JCR 93.4%)

67. Abdelrahman Hussein, Sybrand van der Zwaag, Byungki Kim*, The effect of micromechancial stresses on vacancy formation and stress-driven mass-transport in polycrystalline Fe-Au alloy, Materials Chemistry and Physics, Volume 315, 2024,128878, https://doi.org/10.1016/j.matchemphys.2024.128878 (IF=4.6, SCIE, JCR 62.9%)

66. Ashish K. Shukla and Byungki Kim*, Detection of Single Ag-Cu2O Particle Collision and Catalysis Using Electrochemistry, Journal of Physical Chemistry C, 2024 128 (1), 104-110, https://doi.org/10.1021/acs.jpcc.3c06503 (IF=3.7, SCIE, JCR 54.5%)

65. Abdelrahman Hussein*, Byungki Kim*, Tom Depover, Kim Verbeken*, Modeling the effect of grain boundary diffusivity and trapping on hydrogen transport using a phase-field compatible formulation, International Journal of Hydrogen Energy, Volume 55,
2024, Pages 1445-1455, https://doi.org/10.1016/j.ijhydene.2023.11.270 (IF=7.2, SCIE, JCR 78.3%)

64. Ragu Sasikumar, Byungki Kim*, Multi-interfacial bio-hybrid hydrogel engineering of Alg-Cys polymer coupled with Au nanoparticles as hierarchical excellent electrocatalyst for the detection of prostate cancer drug in human biological fluids, Sensors and Actuators B: Chemical, Volume 401, 2024, 135023, https://doi.org/10.1016/j.snb.2023.135023 (IF=8.4, SCIE, JCR 99.2%)

63. Ragu Sasikumar, Sumin Cho, Arbaz Waqar, Asif Ishfaque, Dongwhi Choi*, Byungki Kim*, Microcrack-assisted piezoelectric acoustic sensor based on f-MWCNTs/BaTiO3@PDMS nanocomposite and its self-powered voice recognition applications, Chemical Engineering Journal, Volume 479, 2024, 147297, https://doi.org/10.1016/j.cej.2023.147297 (IF=15.1, SCIE, JCR 96.8%)

2023

62. Ragu Sasikumar, Byungki Kim*, Roshan Mangal Bhattarai, Dysprosium tungstate incorporated on exfoliated layered molybdenum disulfide-based a flexible and wearable piezoelectric nanogenerator for the dual purpose of self-powered energy harvesting and a smart mask for human breath monitoring, Nano Energy, Volume 118, Part B, 2023, 109024, https://doi.org/10.1016/j.nanoen.2023.109024 (IF=17.6, SCIE, JCR 94.9%)

61. Dhandapani VS, Subbiah R, Thangavel E, Kim C-L, Kang K-M, Veeraraghavan V, Park K, Kim D-E*, Park D*, Kim B. Effect of Target Power on Microstructure, Tribological Performance and Biocompatibility of Magnetron Sputtered Amorphous Carbon Coatings. Materials. 2023; 16(17):5788. https://doi.org/10.3390/ma16175788 (IF=3.4, SCIE, JCR 75%)

60. Sekkarapatti Ramasamy, M., Krishnamoorthi Kaliannagounder, V., Ramasamy, S., Kumar, V., Park, S. J., Park, S. S., Park, C. H., Han, S. S.*, Kim, C. S.*, Kim, B.*, Insight into the Interaction of Pluronic F-127 Functionalized Boron Nitride Nanosheets with Piezoelectric PLLA Nanofiber Scaffolds for Bone Tissue Engineering Applications, J. Appl. Polym. Sci. 2023, 140(43), e54598. https://doi.org/10.1002/app.54598 (IF=3.0, SCIE, JCR 50.6%)

59. Thangavelu Sakthi Priya, Ragu Sasikumar, Tse-Wei Chen, Shen-Ming Chen*, Byungki Kim*, Thangavelu Kokulnathan, Deep eutectic solvents-mediated synthesis of barium stannate/halloysite nanotubes-based nanocomposite for electrochemical detection of hazardous 4-nitroaniline, Applied Clay Science, Volume 244, 2023, 107103, https://doi.org/10.1016/j.clay.2023.107103 (IF=5.6, SCIE, JCR 94.8%)

58. Ragu Sasikumar, Byungki Kim*, Development of boron nitride incorporated molybdenum disulfide nanocomposite as a simultaneous electrochemical transducer for environmentally hazardous ortho and para-nitroaniline isomers in aquatic environments, Process Safety and Environmental Protection, Volume 177, 2023, Pages 177-186, https://doi.org/10.1016/j.psep.2023.07.022 (IF=7.8, SCIE, JCR 89.6%)

57. Ragu Sasikumar, Arbaz Waqar, Byungki Kim*, Synergistic influence of surface‒modified SmxZn1-xCoO3‒poly(vinylidene fluoride) as a piezoelectric material for smart IoT applications, Surfaces and Interfaces, Volume 40, 2023, 103116, https://doi.org/10.1016/j.surfin.2023.103116 (IF=6.2, SCIE, JCR 88.1%)

56. H.-U Ko, I. Yoon, B. Kim, Y.-H. Han, S. J. Park, H.-J. Hwang, and S.-Y. Kim*, "A Haptic Knob Based on the Combination of Shear Mode and Flow Mode Magnetorheological Behaviors," Smart Materials and Structures, June 2023, https://doi.org/10.1088/1361-665X/acd971 (IF=4.1, SCIE, JCR 72.2%)

55. Palanisami S, Dhandapani VS, Jayachandran V, Muniappan E*, Park D*, Kim B, Govindasami K. Investigation on Physico Chemical and X-ray Shielding Performance of Zinc Doped Nano-WO3 Epoxy Composite for Light Weight Lead Free Aprons. Materials. 2023; 16(10):3866. https://doi.org/10.3390/ma16103866 (IF=3.748, SCIE, JCR 77.8%)

54. Ragu Sasikumar, Byungki Kim*, Asif Ishfaque, Active-site-rich binary metal oxides integrated organic–inorganic hybrid nanocomposite: Electrochemical simultaneous detection of multi-drugs of isoprenaline and resorcinol in real samples, Microchemical Journal (IF=5.304, SCIE, JCR 81%), Volume 187, 2023, 108375, https://doi.org/10.1016/j.microc.2022.108375

53. Muhammad Zakria Tariq, Zahid Hanif, Byungki Kim, Dongwhi Choi*, Min Jun Kim*, Sung Jea Park*, Solvent-free fabrication of photothermal polypyrrole-coated sulfur particles for solar steam generation, Applied Surface Science (IF=7.392, SCIE, JCR 97.5%), Volume 612, 2023, 155815, https://doi.org/10.1016/j.apsusc.2022.155815

52. A. Ishfaque and B. Kim, "Real-Time Sound Source Localization in Robots Using Fly Ormia Ochracea Inspired MEMS Directional Microphone," in IEEE Sensors Letters (Scopus), vol. 7, no. 1, pp. 1-4, Jan. 2023, doi: 10.1109/LSENS.2022.3231595.

51. Sasikumar Ragu, Byungki Kim*, Shen-Ming Chen*, Asif Ishfaque, Kwang-Mo Kang, N-substituted CQDs impregnated by Fe3O4 heterostructure: Bifunctional catalyst for electro-catalytic and photo-catalytic detection of an environmental hazardous organic pollutant, Chemosphere (IF=8.943, SCIE, JCR 88.3%), Volume 311, Part 2, 2023,137168, https://doi.org/10.1016/j.chemosphere.2022.137168

50. Ragu Sasikumar, Asif Ishfaque, Byungki Kim*, Lead-free bimetallic oxide loaded on reduced graphene oxide‒poly(dopamine) hybrid nanocomposite with enhanced crystallinity and piezoelectric performance, Ceramics International (IF=5.532, SCIE, JCR 91.3%), Volume 49, Issue 1,2023, Pages 357-368, https://doi.org/10.1016/j.ceramint.2022.08.350

2022

49. Jayachandran, Varuna, Vishnu Shankar Dhandapani, Elango Muniappan*, Dongkyou Park*, Byungki Kim, A. P. Arun, and P. R. Ayyappan. 2022. "Assessment of the Synergetic Performance of Nanostructured CeO2-SnO2/Al2O3 Mixed Oxides on Automobile Exhaust Control" Materials 15, no. 23: 8460. https://doi.org/10.3390/ma15238460 (IF=3.748, SCIE, JCR 77.8%)

48. Madeshwaran Sekkarapatti Ramasamy, Rakesh Bhaskar, Kannan Badri Narayanan, Shiv Dutt Purohit, Sang Shin Park, Amutheesan Manikkavel, Byungki Kim, Sung Soo Han*, Combination of polydopamine and carbon nanomaterials coating enhances the piezoelectric responses and cytocompatibility of biodegradable PLLA nanofiber scaffolds for tissue engineering applications, Materials Today Communications (IF=3.662, SCIE, JCR 47.9%), Volume 33, 2022, 104659, https://doi.org/10.1016/j.mtcomm.2022.104659

47. Madeshwaran Sekkarapatti Ramasamy, Vignesh Krishnamoorthi Kaliannagounder, Ashiqur Rahaman, Chan Hee Park*, Cheol Sang Kim*, and Byungki Kim*, Synergistic Effect of Reinforced Multiwalled Carbon Nanotubes and Boron Nitride Nanosheets based Hybrid Piezoelectric PLLA Scaffold for Efficient Bone Tissue, ACS Biomaterials Science & Engineering (IF=5.395, SCIE, JCR 61.1%), 2022 8 (8), 3542-3556, https://doi.org/10.1021/acsbiomaterials.2c00459

46. Ragu Sasikumar, Byungki Kim*, 3D walnut-like rare-earth gadolinium molybdate encapsulated with thermo-responsive hydrogel for sensitive electrochemical detection of anticancer drug Niftolide in human urine, Colloids and Surfaces A: Physicochemical and Engineering Aspects (IF=5.518, SCIE, JCR 62.8%), Volume 650, 2022, 129593, https://doi.org/10.1016/j.colsurfa.2022.129593

45. Rahaman, A., Kim, B*. An mm-sized biomimetic directional microphone array for sound source localization in three dimensions. Microsyst Nanoeng (IF=8.066, SCIE, JCR 94.5%) 8, 66 (2022). https://doi.org/10.1038/s41378-022-00389-9

44. A. Rahaman* and B. Kim*, "Microscale Devices for Biomimetic Sound Source Localization: A Review," Journal of Microelectromechanical Systems (IF=2.417, SCIE, JCR 55%), vol. 31, no. 1, pp. 9-18, Feb. 2022, https://doi.org/10.1109/JMEMS.2021.3129282

2021

43. Hyung-sub Yook, Jong-Kweon Pyun, Chang-Hee Suh, Sang-Gyun Oh, Tae-Ha Kwon, Byung-Ki Kim, Dong-Kyou Park*, "Study on Hot Stamping of the Rotating Module Upper Plate for an Autonomous Vehicle Seat, Journal of the Korean Society of Manufacturing Process Engineers, Vol.20 No.10 pp.44-49, DOI:https://doi.org/10.14775/ksmpe.2021.20.10.044 (In Korean)

42. Subramanian Ramanathan, Sasikumar Moorthy, Subramaniyan Ramasundaram, Hari Krishna Rajan, Sujayakumar Vishwanath, SteplinPaulSelvin Selvinsimpson, Arulappan Durairaj, Byungki Kim, and Samuel Vasanthkumar*, Grape Seed Extract Assisted Synthesis of Dual-Functional Anatase TiO2 Decorated Reduced Graphene Oxide Composite for Supercapacitor Electrode Material and Visible Light Photocatalytic Degradation of Bromophenol Blue Dye, ACS Omega (IF=3.512, SCIE, JCR 56%) 2021 6 (23), 14734-14747, DOI: 10.1021/acsomega.0c02325

41. Rahaman A, Jung H, Kim B*. Coupled D33 Mode-Based High Performing Bio-Inspired Piezoelectric MEMS Directional Microphone. Applied Sciences-Basel (IF 2.474, SCIE, JCR 58%), 2021; 11(3):1305. https://doi.org/10.3390/app11031305

40. Tahereh Msalehdan, Mehdi Eskandarzade, Abolfazl Tutunchi*, Byungki Kim, Harry Questa, Mahdi Mohammadpour, Mehdi Shahedi Asl, Two-dimensional clay nanosheet-reinforced polytetrafluoroethylene composites and their mechanical/tribological studies, Materials Today Communications (IF=2.678, SCIE, JCR 52%), Volume 26, 2021, 102026,, https://doi.org/10.1016/j.mtcomm.2021.102026

39. Madeshwaran Sekkarapatti Ramasamy, Ashiqur Rahaman, Byungki Kim*, Effect of phenyl-isocyanate functionalized graphene oxide on the crystalline phases, mechanical and piezoelectric properties of electrospun PVDF nanofibers, Ceramics International (IF=3.830, SCIE, JCR 94%), Volume 47, Issue 8, 2021, Pages 11010-11021, https://doi.org/10.1016/j.ceramint.2020.12.223

38. Madeshwaran Sekkarapatti Ramasamy, Ashiqur Rahaman, Byungki Kim*, "Influence of oleylamine–functionalized boron nitride nanosheets on the crystalline phases, mechanical and piezoelectric properties of electrospun PVDF nanofibers," Composites Science and Technology (IF=7.094, SCIE, JCR 94%), 2021, 108570, https://doi.org/10.1016/j.compscitech.2020.108570

37. A. Rahaman and B. Kim*, "Sound Source Localization in 2D Using a Pair of Bio–Inspired MEMS Directional Microphones," in IEEE Sensors Journal(IF=3.073, SCIE, JCR 72%), vol. 21, no. 2, pp. 1369-1377, 15 Jan.15, 2021, doi: 10.1109/JSEN.2020.3020357.

2020

36. Green, S., Song, S. & Kim, B*. Fabrication of Channel Circuit Electrodes and Flexible Graphene Resistive Sensors for Detecting Dinitrotoluene 2,4 (DNT). Int. J. Precis. Eng. Manuf. (IF=1.378, SCIE, JCR 28%) 21, 1943–1953 (2020). https://doi.org/10.1007/s12541-020-00391-z

35. Ashiqur Rahaman, Chung Hyuk Park, Byungki Kim*, "Design and characterization of a MEMS piezoelectric acoustic sensor with the enhanced signal–to–noise ratio", Sensors and Actuators A: Physical (IF=2.904, SCIE, JCR 71%), Volume 311, 15 August 2020, 112087, https://doi.org/10.1016/j.sna.2020.112087

34. Rahaman, A., Kim, B*. "Sound source localization by Ormia ochracea inspired low–noise piezoelectric MEMS directional microphone" Scientific Reports (IF=3.998, SCIE, JCR 76%) 10, 9545 (2020). https://doi.org/10.1038/s41598-020-66489-6

33. Abdelrahman Hussein, Subramaniyan Ramasundaram, Byungki Kim*, "A novel method for fabricating bioinspired layered nanocomposites using aligned graphene oxide/PVDF and their micromechanical modeling", Materials Today Communications (IF=2.678, SCIE, JCR 52%), Volume 24, September 2020, 101050, https://doi.org/10.1016/j.mtcomm.2020.101050

32. Han, S., Ishfaque, A., Phamduy, P., Kim, B.*, "Effect of Squeeze Air Film Damping on Diffraction Grating Based Bio-inspired MEMS Directional Microphone", Microsystem Technologies (IF=1.513, SCI, JCR 34%), 26, 1203–1212 (2020), https://doi.org/10.1007/s00542-019-04650-6

2019

31. Jongwon Kim, Kwang-Hoon Ko and Byungki Kim*, Precise Displacement Measurements with a Tunable Laser and Interferometer
, Journal of the Korean Society for Nondestructive Testing, Vol. 39, No. 6, December 2019, Pages 329-334, http://doi.org/10.7779/JKSNT.2019.39.6.329 (In Korean)

30. Subramaniyan Ramasundaram, Ashiqur Rahaman, Byungki Kim*, "Direct preparation of β-crystalline poly(vinylidene fluoride) nanofibers by electrospinning and the use of non-polar silver nanoparticles coated poly(vinylidene fluoride) nanofibers as electrodes for piezoelectric sensor", Polymer (IF=3.771, SCI, JCR 85%), Volume 183, 21 November 2019, 121910 https://doi.org/10.1016/j.polymer.2019.121910

29. Arulappan Durairaj, Subramaniyan Ramasundaram, Thangavel Sakthivel, Subramanian Ramanathan, Ashiqur Rahaman, Byungki Kim*, Samuel Vasanthkumar*, "Air bubbles induced piezophotocatalytic degradation of organic pollutants using nanofibrous poly(vinylidene fluoride)-titanium dioxide hybrid", Applied Surface Science (IF=5.155, SCI, JCR 97%), Volume 493, 1 November 2019, Pages 1268-1277, https://doi.org/10.1016/j.apsusc.2019.07.127

28. S. Nam and B. Kim*, "Design of Material Removal Rate to Reduce Machining Time of Dental Crown", Journal of Mechanical Science and Technology (IF=1.221, SCIE, JCR 31%), July 2019, Volume 33, Issue 7, pp 3423–3434, https://doi.org/10.1007/s12206-019-0637-y

27. Ashiqur Rahaman, Asif Ishfaque, Byungki Kim*, "Effect of torsional beam length on acoustic functionalities of bio-inspired piezoelectric MEMS directional microphone" IEEE Sensors Journal(IF=3.076, SCIE, JCR 79%), VOL. 19 , NO. 15, Aug.1, 2019, Pages 6046 - 6055, doi: 10.1109/JSEN.2019.2909501

26. A. Hussein and B. Kim*, "Micromechanics based FEM study on the mechanical properties and damage of epoxy reinforced with graphene based nanoplatelets", Composite Structures (IF=4.101, SCIE, JCR 82%), Volume 215, 1 May 2019, Pages 266-277, https://doi.org/10.1016/j.compstruct.2019.02.059

25. Asif Ishfaque, Ashiqur Rahaman, Byungki Kim*, "Bioinspired low noise circular-shaped MEMS directional microphone," J. Micro/Nanolith. MEMS MOEMS (IF=1.299, SCIE, JCR 34%) 18(1), 010501 (5 February 2019), doi: 10.1117/1.JMM.18.1.010501

24. Elangovan Thangavel, Vishnu Shankar Dhandapani, Karthigaimuthu Dharmalingam, Mohana Marimuthu, Murugan Veerapandian, madhankumar Arumugam, Sanghyo Kim, Byungki Kim, Ramasundaram Subramanian, DaeEun Kim, " RF Magnetron Sputtering Mediated NiTi/Ag Coating on Ti-alloy Substrate with Enhanced Biocompatibility and Durability", Materials Science & Engineering C (IF=5.080, SCIE, JCR 83%), Volume 99, June 2019, Pages 304-314, https://doi.org/10.1016/j.msec.2019.01.099

23. Anitha Devadoss, Ramasundaram Subramaniyan, K. Asokan, Byungki Kim, Sudhagar Pitchaimuthu, "Enhanced Water Oxidation Catalytic Performance of Graphene Oxide by Gamma Ray Irradiation Post-Treatment", Materials Letters (IF=2.687, SCI, JCR 70%), Volume 241, 15 April 2019, Pages 31-34, doi:10.1016/j.matlet.2019.01.035

22. A, Rahaman, A. Ishfaque, H. Jung and B. Kim*, "Bio-inspired rectangular shaped piezoelectric MEMS directional microphone," IEEE Sensors Journal (IF=2.617, SCIE, JCR 77%), VOL. 19, NO. 1, January 1, 2019, Pages 88-96, doi: 10.1109/JSEN.2018.2873781

2018

21. S. Sarkar, A. Ishfaque, M. Usman, I. Gaponov and B. Kim*, "Graphene-based Composite Protective Coating for Twisted Strings and Its Experimental Evaluation," IEEE Transactions on Nanotechnology (IF=2.857, SCI, JCR 72%), vol. 17, no. 5, pp. 1036-1044, Sept. 2018, doi: 10.1109/TNANO.2018.2856265

20. A. Hussein and B. Kim*, Graphene/polymer nanocomposites: the active role of the matrix in stiffening mechanics, Composite Structures (IF=4.101, SCIE, JCR 82%), Volume 202, Oct. 15, 2018, Pages 170-181, https://doi.org/10.1016/j.compstruct.2018.01.023

19. S. Sarkar, and B. Kim*, “Synthesis of Graphene Oxide-Epoxy Resin Encapsulated Urea-Formaldehyde Microcapsule by In-situ Polymerization Process,” Polymer Composites (IF=2.004, SCI, JCR 70%), Volume39, Issue3, March 2018, Pages 636-644, DOI: 10.1002/pc.23979

18. A. Ishfaque and B. Kim*, "Fly Ormia Ochracea Inspired MEMS Directional Microphone: A Review," IEEE Sensors Journal (IF=2.512, SCIE, JCR 80%), VOL. 18, NO. 5, MARCH 1, 2018, Pages 1778 - 1789, doi: 10.1109/JSEN.2017.2787862

2017

17. Doo Hyeon Ryu, Jongwon Kim and Byungki Kim*, "Development of Simple Optical Triangulation Device and Its Signal Processing Software for Critical Dimension Measurement," Journal of the Korean Society for Nondestructive Testing, Vol.37, No.5, pp.335-341, October, 2017 DOI:10.7779/JKSNT.2017.37.5.335 (In Korean)

16. A. Hussein, S. Sarkar, K. Lee, B. Kim*, “Cryogenic fracture behavior of epoxy reinforced by a novel graphene oxide/poly(p-phenylenediamine) hybrid,” Composites Part B: Engineering (IF=4.727, SCI, JCR 97%), Volume 129, 2017, Pages 133-142, https://doi.org/10.1016/j.compositesb.2017.07.085

15. S. Sarkar, and B. Kim*, "Analysis of Graphene-Encapsulated Polymer Microcapsules with Superior Thermal and Storage Stability Behavior," Polymer Degradation and Stability (IF=3.120, SCI, JCR 80%), Volume 138, 2017, Pages 72-81, https://doi.org/10.1016/j.polymdegradstab.2017.02.012

14. S. Sarkar, A. Hussein and B. Kim*, “Effects of Changing the Amount of Oxidizing Agents on the Structural Properties of Graphene Oxide and its Dispersion Stability in an Aqueous Medium,” Chemical Engineering Communications (IF=1.433, SCI, JCR 57%), Vo1.204, Issue 2, 2017, http://dx.doi.org/10.1080/00986445.2016.1260009

13. A. Ishfaque and B. Kim*, “Analytical Solution for Squeeze Film Damping of MEMS Perforated Circular Plates Using Green's Function,” Nonlinear Dynamics (IF=3.000, SCI, JCR 94%), Vol.87, No3, pp 1603–1616, 2017, DOI: 10.1007/s11071-016-3136-z

2016

12.A. Ishfaque and B. Kim*, “Squeeze film damping analysis of biomimetic micromachined microphone for sound source localization,” Sensors and Actuators A: Physical (IF=2.201, SCI, JCR 83%), Vol.250, pp. 60-70, 15 October 2016, DOI: 10.1016/j.sna.2016.09.010

11. A. Hussein, S. Sarkar, D. Oh, K. Lee and B. Kim*, “Epoxy/p-phenylenediamine functionalized graphene oxide composites and evaluation of their fracture toughness and tensile properties,” Journal of Applied Polymer Science (IF=1.866, SCI, JCR 59%), Vol.133, No.34, pp. 43821, 10 September 2016, DOI: 10.1002/app.43821

10. A. Ishfaque and B. Kim*, “Analytical Modeling of Squeeze Air Film Damping of Biomimetic MEMS Directional Microphone,” Journal of Sound and Vibration (IF=2.107, SCI, JCR 80%), Vol.373, pp.422-435, 4 August 2016, DOI: 10.1016/j.jsv.2016.04.031

9. A. Hussein, S. Sarkar, and B. Kim*, “Low Temperature Reduction of Graphene Oxide Using Hot-plate for Nanocomposites Applications,” Journal of Materials Science & Technology (IF=2.267, SCIE, JCR 88%), Vol.32, No.5, pp. 411-418, May 2016,

DOI: 10.1016/j.jmst.2016.02.001

2012 before joining at Koreatech

8. J. Lee, S. Song, and B. Kim, “Functionalized Graphene Sheets-Epoxy Based Nanocomposite for Cryotank Composite Application”, Polymer Composites, Volume 33, Issue 8, pages 1263–1273, August 2012, https://doi-org.proxygw.wrlc.org/10.1002/pc.22251

7. B. Kim*, P. Phamduy, J. Sinibaldi, and G. Karunasiri, “Characterization of a micromachined vertically deformable varying-pitch grating for a spectrometer”, Journal of Micromechanics and Microengineering, 22, 015001, 2012

6. D. Shin and B. Kim*, “A laser interferometer encoder with two micromachined gratings generating phase-shifted quadrature”, Journal of Micromechanics and Microengineering, 21, 085036, 2011

5. B. Kim*, F. L. Degertekin and T. R. Kurfess, “A Micromachined Scanning Grating Interferometer for the Out-of-plane Vibration Measurement of MEMS”, Journal of Micromechanics and Microengineering, 17, pp. 1888–1898, 2007

4. M. Schmittdiel, T. R. Kurfess, F. L. Degertekin, and B. Kim, “Scanning Optical Microinterferometer for MEMS Metrology”, NAMRC Transactions, pp. 97-104, 2005

3. B. Kim*, M. Schmittdiel, F. L. Degertekin, and T. R. Kurfess, “Scanning Microinterferometer for Microstructure Metrology”, ASME Journal of Manufacturing Science and Engineering, 126(4), pp. 807-812, 2004

2. B. Kim, and W. Lee, “Stability and Frequency Response Analysis of Multipurpose Vehicle Using Linear Model”, Journal of the Korean Society of Precision Engineering, Vol. 14, No 9, September, 1997. (In Korean)

1. B. Kim, and C. Choi, “Simulation on the Tilting of Truck Cabin”, KIA Technical Review, No 21, 1996. (In Korean)

Conference Proceedings/Abstracts

A. Rahaman, B. Kim, “Artificial intelligence (AI) speaker made of bio–inspired piezoelectric MEMS directional microphone for voice differentiation in a directional range of 0◦–360◦”, The 49th International Congress and Exposition on Noise Control Engineering, Seoul, Korea, Aug. 2020

A. Rahaman, B. Kim, “A low–noise bio–inspired piezoelectric MEMS directional microphone for noise monitoring”, The 49th International Congress and Exposition on Noise Control Engineering, Seoul, Korea, Aug. 2020

A. Rahaman, B. Kim, “Sound source localization in three-dimensions using bio-inspired MEMS microphones”, The 22nd Korean MEMS conference, Pyeongchang, Korea, Aug. 2020

S. Ramasundaram, A. Hussein, B. Kim, “Systematic Optimization of Electrospinning Flow Rate for Preparing Highly β-crystalline Poly(vinylidene fluoride) Nanofibers”, MRS Fall Meeting, Boston, USA, Dec 2019

A. Rahaman, B. Kim, “Sound Source Localization by Bio-inspired MEMS Microphones”, ASME IMECE 2019, Salt Lake City, USA, Nov. 2019

A. Rahaman, B. Kim, “Micromachined Piezoelectric Acoustic Sensor with Enhanced SNR for Audio Applications”, IEEE Sensors 2019, Montreal, Canada, Oct. 2019

A. F. Badria, A. Hussein, E. Ergene, O Guvener, C. Oto, B. Kim, P. Yilgr Hurt, “3D Printed Bone Lego: Preliminary Design, Mechanical and Biological Characterization”, 30th Annual Conference of the European Society for Biomaterials, Dresden, Germany, Sept. 2019

A. Hussein, S. Ramasundaram, B. Kim, “Bioinspired aligned graphene oxide/PVDF nanocomposites: Fabrication, characterization and micromechanical modeling", 5th International Conference on Mechanics of Composites, Lisbon, Portugal, July 2019

A. Rahaman, B. Kim, “FLY-INSPIRED MEMS DIRECTIONAL ACOUSTIC SENSOR FOR SOUND SOURCE DIRECTION”, Transducers 2019, Berlin, Germany, June 2019

Will be updated soon

A. Hussein, B. Kim, “ Synthesis of amine functionalized graphene oxide/epoxy nanocomposite and their mechanical properties,” Korean Society of Precision Engineering Autumn Conference 2015, Republic of Korea

A. Ishfaque, B. Kim, “Design of Piezoelectric Based Biomimetic Directional MEMS Microphone”, Korean Society of Precision Engineering Autumn Conference, 2015, Republic of Korea.

A. Ishfaque, B. Kim, “Design of Polymumps Based Circular Shaped Biomimetic Directional MEMS Microphone”, Korean Society of Precision Engineering Autumn Conference, 2015, Republic of Korea.

S. Sarkar, B. Kim, “Microencapsulation of Three Component Core System by In-situ Polymerization Process”, 6th International Conference on Nanotechnology: Fundamentals and Applications (ICNFA’15),Barcelona, Spain.

A. Hussein, B. Kim, “Graphene based polymer matrix composites for liquid hydrogen fuel storage: Opportunities in reusable launch vehicle technology,” The 14th Space Launch Vehicle Technology Symposium. 2015. 02, South Korea.

A. Hussein, B. Kim, “ Synthesis of functionalized graphene by hot plate reduction/exfoliation of graphite oxide. The 2nd Korean Graphene Symposium. 2015. 03, South Korea.

A. Ishfaque and B. Kim, “DESIGN OF CENTRALLY SUPPORTED BIOMIMETIC MEMS MICROPHONE FOR ACOUSTIC SOURCE LOCALIZATION,” ASME Proceedings of IMECE, Houston TX, 2015

A. McLaughlin and B. Kim, “FABRICATION AND FRACTURE TEST OF FUNCTIONALIZED GRAPHENE-PETI 5 COMPOSITE,” ASME Proceedings of IMECE, Montreal Canada, 2014

S. Han and B. Kim, “A PARAMETER STUDY OF MICROMACHINED SEESAW TYPE MICROPHONE,” ASME Proceedings of IMECE, Montreal Canada, 2014

P. Phamduy and B. Kim, “MICROCAPSULES CONTAINING SOLVENT AND EPOXY WITH MULTI-WALLED CARBON NANOTUBES FOR SELF-HEALING,” ASME Proceedings of IMECE, Montreal Canada, 2014

B. Kim and P. Phamduy, “CHARACTERIZATION OF MICROMACHINED SEESAW TYPE MICROPHONE”, ASME Proceedings of IMECE, San Diego CA, 2013

A. McLaughlin, J. Lee, S. Song, and B. Kim, “Carbon Fiber Reinforced Graphene Nanocomposite to Enhance Fracture Toughness for Cryogenic Application,” ASME Proceedings of IMECE, Houston TX, 2012

S. Green, S. Song, J. Lee, and B. Kim, “Flexible Graphene Sensors using Channel Circuit Electrodes for Explosive Trace Detection,” ASME Proceedings of IMECE, Houston TX, 2012

J. Lee, S. Green, S. Song, P. Phamduy and B. Kim, “Flexible Graphene Sensors for Explosive Trace Detection,” ASME Proceedings of IMECE, Denver CO, 2011

P. Phamduy, A. McLaughlin, F. Gao, B. Kim and Z. Gu, “Characterization of Gold Nanowire through Beam Deflection using Atomic Force Microscopy,” ASME Proceedings of IMECE, Denver CO, 2011

D. Shin and B. Kim, “An Optical Encoder Using Micromachined Two Gratings with Phase Difference,” ASME Proceedings of IMECE, Vancouver, Canada, 2010.

N. Wu, W. Wang, Y. Ling, L. Farris, B. Kim, M. J. McDonald, and X. Wang, “Label-free Detection of Biomolecules Using LED Technology,” Proceedings of SPIE, 7574, 757401, 2010.

Y. Ling, N. Wu, W. Wang, L. Farris, B. Kim, X. Wang and M. J. McDonald, “Thin film thickness variation measurement using dual LEDs and reflectometric interference spectroscopy model in biosensor,” Proceedings of SPIE, 7559, 75590K, 2010.

B. Kim, B. Kwak, and F. Jamil, “High-speed AFM Probe with Micromachined Membrane Tip,” Proceedings of SPIE, 7042, 704204, 2008.

B. Kim, “A New Probe with Diffraction Based Displacement Sensing,” CLEO/Pacific Rim, pp 1036-1037, 2007.

B. Kim, J. Sinibaldi, and G. Karunasiri, “MEMS Scanning Grating Spectrometer,” IEEE Optical MEMS, pp. 46-47, 2006.

B. Kim, O. Karhade, M. Schmittdiel, F. L. Degertekin, and T. R. Kurfess, “Micro-Interferometer for Small Scale Metrology,” Proceedings of American Society for Precision Engineering, Norfolk, VA, 2005.

B. Kim, M. Schmittdiel, F. L. Degertekin, and T. R. Kurfess, “Actively Controlled Diffraction Grating Interferometer MEMS Devices,” Proceedings of SPIE, 5721, pp. 151-158, 2005.

B. Kim, M. Schmittdiel, F. L. Degertekin, and T. R. Kurfess, “Deformable Diffraction Grating for Scanning Microinterferometer Arrays,” Proceedings of SPIE, 5348, pp. 98-107, 2004.

B. Kim, H. A. Razavi, F. L. Degertekin, and T. R. Kurfess, “Micromachined Interferometer for MEMS Metrology,” Proceedings of American Society for Precision Engineering, Gainesville, Florida, pp.73-78, 2003.

B. Kim, H. A. Razavi, F. L. Degertekin, and T. R. Kurfess, “Micromachined Interferometer for Measuring Dynamic Response of Microstructures,” ASME Proceedings of IMECE, November 17-22, 2002.

B. Kim, H. A. Razavi, F. L. Degertekin, and T. R. Kurfess, “Microinterferometer for Non-contact Inspection of MEMS,” The 3rd International Workshop on Microfactories, pp.77-80, 2002.

B. Kim, W. Lee, and C. Choi, “Stability and Frequency Response Analysis of Multipurpose Vehicle Using Linear Vehicle Model, Spring Conference Proceeding of KSAE, 1997. (In Korean)

B. Kim, and S. Kim, “A Study on Iterative Learning Control Method to Improve Path Tracking Performance of Robot,” Proceedings of KSME Autumn Annual Meeting, pp. 619-624, 1992. (In Korean)

SMALL

Publications